Infrared Sauna Wraps

email product to a friend

0405700004 Infrared Sauna Wrap 2 Zone PH2BII PROFESSIONAL MODEL, BEST SELLER! Heat warms both front and back of body Low Voltage DC36V • Width x Length: 180 x 92 cm / 70" x 36 1/4" Temperature: 30°C~60°C, Manual Control Regular Price: Can$ 738.00 / Each Sale Price: Can$ 469.00 / Each You Save: Can$ 269.00 / Each

	Specifications
	Category Infrared Therapy; Detoxification; Relaxation; Stress Relief; Weight Loss; Energy; Pain Relief; Rehabilitation; Cellulite Reduction; Great Gift Ideas

INFRARED SAUNA WRAP

LOW VOLTAGE FULL-ENCLOSURE INFRARED SAUNA WRAP PH2-BII,  FEATURING 2 SIMULTANEOUSLY CONTROLLED HEATING ZONES

The Infrared Sauna Wrap PH-2B II is a low-voltage FIR thermal wrap, with 2 simultan­eously controlled body heating zones. Sturdy and able to handle heavy usage, the Infrared Sauna Wrap PH-2BII is suitable for use not only at home, but at spas, weight loss centers, and beauty salons. The direct heat from the blanket allows for gentle radiant relaxation of the muscles, and complements body shaping systems. WIth controlled timer and temperature, this easy-to-clean, portable wrap provides a complete sauna experience without having to breathe in uncomfortalbe hot air.

THE INFRARED SAUNA WRAP PH-2B II SYSTEM COMPONENTS:

A. Thermal Wrap: Conducts heating to the body. Space Carbon Fiber, covered by a layer of PU (polyurethane) fabric. B. Controller: Adjusts and controls the temperature and timer of the thermal blanket. C. Power Cord: Supplies power to the control box.

PANEL DISPLAY AND FUNCTIONS OF THE KEYS:

ON/OFF  Switch the system 'ON' or 'OFF'  Temperature Key () Press  to increase or press  to decrease the temperature, 1° C for each time pressed.  Timer Key (  ) Press  to increase or press to decrease the time, 5 minutes for each time pressed.  ‘1’ and ‘2’ Display Connection Indicator lights shine green when heating has started.  Overload Display Overload indicator light shines when the power surpasses 150W, and the alarm buzzer will sound.  Start/Stop Key Press Start/Stop key to start or stop the device after setting the   temperature and timer.

INFRARED SAUNA WRAP PH-2B II INSTRUCTIONS:

1. Place the Infrared Sauna Wrap on a flat surface, such as the bed or floor. 2. Wrap your body in the blanket. If a massage or body oil is used, then it is recommended to first wrap the body in a plastic film or sheet to protect the thermal blanket. 3. Put the control box on a flat surface such as a table and insert the plug into the main power socket. 4. Connect the two leads from the control box to the two jacks in the thermal blanket. 5. Turn the main power switch on at the rear of the control box. The red ‘Power’ indicator on the control panel will light. The device has not started working yet. 6. Press the ‘ON/OFF’ key to start setting the temperature and the timer. 7. Press ‘Timer ’ to set the working time. For each press, the time will increase or decrease by 5 minutes. The default time is 40 minutes. 8. Press ‘Temperature  ’ to set the working temperature. For each press, the temperature will increase or decrease by 1°Centigrade. Set the temperature to your specific requirements. The default temperature is 42°C. 9. Press ‘Start/Stop’ key. The green indicators ‘1’ and ‘2’ will light, showing that heating has started. 10. When the heating timer counts down to ‘0’, a signal will sound three times and the digital timer will display ‘0’ showing that heating has finished. 11. After using the Infrared Sauna Wrap, pull the plug out from power source. 12. If at any time you need to stop the session, just press the ‘Start/Stop’ key. When the green indicators go out, the system has stopped working. 13. Wipe the sweat from the surface of the thermal blanket with a wet towel and dry the thermal blanket by laying it flat on a bed or table for more than 1 hour. 14. Fold the blanket and store it in a cool,dry place. 16. For professional use at spa, weight loss center or beauty salon, wipe surface of the thermal blanket as above, and leave an interval between usage of at least 1/2 hour, preferably 1 hour.     Suggested Use: 1. When the room temperature is lower than 20 °C, you may preheat the blanket for 10 minutes prior to use. 2. It is suggested that you be well hydrated by drinking a glass of water prior to using.

INFRARED SAUNA WRAP PH-2B II TECHNICAL SPECIFICATIONS:

Model No. PH-2B II  Input Volts 100V ~120V 60Hz / 220V ~240V 50Hz  Output Volts DC36V  Material Made of Nylon, covered by a layer of PU (polyurethane) fabric, with Space Carbon Fiber  Input Power 150W(Max.)  Control Panel Manual Control  Heating Zones 2 (2 connections controlled simultaneously)  Temperature 30°C ~ 60 °C / 86°F~140°F  Separate Heating Zone Control N/A  Timer 5~95 minutes Size 180 x 92 cm / 70" x 36 1/4"  Net Weight 8.1kg  Warranty 1 year